Precautions For Using Strap-type Mask Machine

1. Remove the packaging and check the surface and parts of the device for signs of damage. Check whether the screws are loose, whether the electrical connectors are locked, and whether the accessories are complete.
2. The equipment should be placed on a flat hard ground. The mask strapping machine is required to be at least 0.5 meters away from the heat source, and there must be at least 1 meter of space in front of and behind the mask strapping machine and at least 1 meter of space on the left and right for easy operation.
3. Check the voltage requirements on the label on the back of the oscillator box, and make sure the system is well grounded.
4. Connect the device to the power supply, making sure to turn off the power switch first.